Sunday, 25 March 2012

Types of energies available from the ocean

Currently i am working on a project on tidal current energy as my final year project. I would like to share some information on ocean energy. There are basically four types of ocean energy that we can harness


1) Tidal Energy
2) Tidal Current Energy
3) Ocean Thermal Energy
4) Tidal Wave Energy


Now lets just briefly describe each type to exactly differentiate them from each other :


1) TIDAL ENERGY :


          This is the energy available due to difference in head during High tide and Low tide. In simple words during high tide the level of water is higher than that during the low tide and this difference in level or height of water can be used to generate power. A huge dam like construction called Barrage is done to store water during high tide. Now when low tide occurs the barrage gates are opened and micro head turbines are driven to generate power. Usually a 6-8m head difference (level difference) can generate sufficient amount of power.
          The working can be understood through the following diagram.


                                             
                                      Fig : Working of a tidal barrage


 An actual barrage looks like something shown below. It is a huge investment and not so environment friendly since it affects marine life.


               Fig : Aerial view of the La Rance Tidal Power Plant (Source: Electricite H de France).




Now the next type of energy is the tidal current energy.

2) TIDALCURRENT ENERGY :
            
               This is the energy available due to the current or flowing of sea water. The current velocity can be used to drive a suitable turbine to generate power. Though the power available from this source is a very small quantity but a large farm of such turbines can produce significant power. Figure below will explain this type of power.




                                           Fig: Concept of tidal current power


3) OCEAN THERMAL ENERGY :

             There is a difference between temperature at the surface of sea water and deep below sea level. The temperature at surface is more because of solar heating while as we go deep into the sea the temperature goes on decreasing because solar heat cannot penetrate deep into the water. Practically a temperature difference of about 15 to 20 degree celcius is observed. So basically this difference in temperature is used to develop power using a Carnot cycle. A working fluid can be used between the high temperature surface water and low temperature water to drive a turbine. Heat exchangers are used for heat transfers. This type of power is not yet commercially harnessed.


                                                              Fig : Ocean Thermal Energy


4) WAVE POWER :

                   As we know a sea wave moves up and down as it propagates. These positions are respectively the "crest" and the "trough". The difference in the levels or height of crest and trough is the head available. This difference can be converted into power. A floating device is used for this purpose. First let us see the figure and then see the working.




                                                          Fig : Wave Power

The floating device is nothing but a chamber open at the bottom for water to enter, an air chamber, the turbine and ports for exhaust and inlet of air.Now when crest occurs the water will rise into the chamber and it push air to occupy space for itself. The pushed air follows the path shown by the red arrows. On its way out it will push the turbine blades and hence drive it to produce power. Now when a trough occurs the level of water falls and since the chamber is a closed one a vacuum is created inside the chamber as a result of which air rushes inside the chamber through the inlet port. Again it drives the turbine to produce power. The critical component here is the turbine which should rotate in one direction only when the air rushes in or out of the chamber. For this purpose a helical turbine that is a turbine with its blades following a helix path is used. Also any other vertical axis turbine can be used in place of a helical turbine.
         This kind of power generation is not very economically feasible and it will take a lot of work to make it a practical source of power generation.


We have seen the major types of ocean energy available and also the important methods to harness them. There are many other methods also to harness above mentioned power sources but the ones mentioned above are quite well established as compared to others.






No comments:

Post a Comment